Home | products | PRODUCTS


Product Code:
Reward Points:
Product Detail

Desanders are solid controls equipment with a set of hydrocyclones that separate sand and silt from the drilling fluids in drilling rigs. so it is called Hydrocyclone Desander or Desander Unit. Desanders are installed on top of the mud tank following the shale shaker and the degasser, but before the desilter. Desander removes the abrasive solids from the drilling fluids which cannot be removed by shakers. Normally the solids diameter for desander to be separated would be 45~74μm.

Landa is the professional Hydrocyclone Desander manufacturer and exporter in China. we can manufacture Hydrocyclone with the sizes of 8″, 10″, 12″ and 14″ for Desander for oil drilling mud system and 14″~20″ Hydrocyclone for Desanders for micro-tunneling separation plant. And Cyclone Desanders and Desanders without bottom shaker in different capacities can also be provided.

BWCSQ series Desander Features and Benefits

1.Design: Adopt ANSYS limited element analysis to optimize the structure.

2.Material: Use Q235B from BAOSTEEL for body, and High strength compound rubber material used to reduce shock.

3.Vibration motor: Italy OLI /American Martin, or according to customer requirement.

4.Electrical control system: Explosion-proof electrical control system with electrical components as ABB, Siemens, Schneider

5.Treatment: Grinding, Abrasive blasting, Epoxy zinc rich primer, Intermediate painting with epoxy micaceous iron, and Finish painting with polyurethane

6.Hydracyclone cone: Made of wearing-resist polyurethane and in the structure similar to Derrick design.

7.Inlet and outlet: Fast joint connection

BWCSQ series Desander Display

BWCSQ2S Desander

BWCSQ250-2S Desander

BWCSQ250-1S Desander

BWCSQ series Desander Parameters