Home | products | Solid Control Equipment
Vertical Cuttings Dryer
Vertical Cuttings Dryer
Brand:
Product Code:
Reward Points:
Product Detail

Vertical cuttings dryer could be regarded as a vertical centrifuge, and widely used to treat drilling cuttings in oil drilling field. Drill cuttings dryer is the core equipment of drilling cuttings management. it can be to reduce waste and increase fluid recovery.


Vertical Cuttings Dryer

Vertical Cuttings Dryer is fed via screw conveyor, vacuum system, or rotary-lobe solids pump from the flow-line shale shakers. Drill cuttings are fed into the jet mud hopper(hopper), and distributed along the inner wall of the screen with the aid of the rotor.

Landa’s vertical cuttings dryer copes with oil-based and water-based problem in native country and foreign countries, which is also applied to maximally meet the demand for drilling waste processing on different working conditions. By using this equipment, oil-based drilling mud can get the same processing result with water-based drilling mud, which can 98% satisfied customers.

Vertical Cuttings Dryer Working Principle

The liquid phase, or “filtrate”, passes through the screen openings while the vertical scraper with sintered tungsten carbide tiles scrape the accumulating cake solids towards the bottom of the Vertical Cuttings Dryer for disposal. The filtrate gravity flows into a containment tank and pumped to a high speed decanter centrifuge.

Upon discharge, the dried cuttings are then safely discharged to the environment, are collected for further treatment or off-site disposal. Brightway`s rugged, continuous Vertical Cuttings Dryer significantly improves liquid phase recovery, thereby paying for itself.

Vertical cuttings dryer could be regarded as a vertical centrifuge, the discharged cuttings transfered by the auger get into the Vertical cuttings dryer from the opening on the top, under the function of centrifugal force produced by rotation of the screen module. Liquid flow out from the opening at the flank side while the solids discharged out from the outlet at the bottom of the cuttings dryer.vertical cuttings dryer moisture percentage, 6-10%, that means there is no flowing water, so it could be transported easily.

Vertical Cuttings Dryer Features

1. Adopting Italy comprehensive analysis technology to meet domestic and overseas customers `s treatment requirments on the drilling site

2.The Capacity can be up to 50 tons.

3. It can separate and dry different kinds of drilling waste, such as water-based mud, oil-based mud, composite mud.

4. Adopting independent oil lubrication and cooling system to extend equipments lifetime.

5.The discharge port is flexible to operate, which can be in different types, such as spiral type, belt type.

6. Water-based mud and composite mud: Water content 8-10%, oil-based mud: water content≤6%, OOC≤3%.


Vertical Cuttings Dryer Display


Drilling Waste Cuttings Dryer Case


Related Reading of Cuttings Dryer

0. Drilling Cuttings Treatment-Drilling Waste Management

1. Solution of Drilling Waste :Vertical Cuttings Dryer

2. Shipment of Vertical Cuttings Dryer

3. Principle of Drilling Waste Disposal

4. Shipment of Oily Sludge Treatment Systems

5. Comparison of Oil-based Mud Treatment Technology


Vertical Cuttings Dryer Parameter