Shandong Landa Petroleum Equipment Co., Ltd.

Home - Products - Auto-Matic Tank Cleaning - LDTC180 Auto-Matic Tank Cleaning
  • LDTC180 Auto-Matic Tank Cleaning - Auto-Matic Tank Cleaning - Shandong Landa Petroleum Equipment Co., Ltd.
  • LDTC180 Auto-Matic Tank Cleaning - Auto-Matic Tank Cleaning - Shandong Landa Petroleum Equipment Co., Ltd.
LDTC180 Auto-Matic Tank Cleaning
Product Category:Auto-Matic Tank Cleaning
Product Introduction:

ATC (Automatic Tank Cleaning) is an advanced automatic, fully enclosed and physical cleaning technology. It cleans the tank by jet washers to spray the cleaning medium at a certain temperature, pressure and flow rate, to remove the coagulum and sludge on the surface, and to recover the effective substances to achieve the conditions of in-tank overhaul and hot work.

+86 13954571761 sale@hrada.net

Introduction of equipment

"ATC (Automatic Tank Cleaning) is an advanced automatic, fully enclosed and physical cleaning technology. It cleans the tank by jet washers to spray the cleaning medium at a certain temperature, pressure and flow rate, to remove the coagulum and sludge on the surface, and to recover the effective substances to achieve the conditions of in-tank overhaul and hot work. It has the advantages of high safety, good economic benefits (more than 98% of hydrocarbons in sediments can be recovered), good cleaning effect, high efficiency, environmental protection, etc.

Landa's ATC is suitable for cleaning various types of above-ground storage tanks with storage media of crude oil, refined oil (gasoline, diesel oil, aviation kerosene, lubricating oil, etc.) and chemical liquefied products, with storage tank volume ranging from 100 cubic meters to 150,000 cubic meters."

Unit Configuration

No.Unit NameDescriptionMain Part
1 Circulation and Transfer Unit Core unit of ATC. It is used to realize the whole cleaning process, provide pumping pressure, raise the temperature of cleaning liquid and recover the liquid in the tank. 2 sets of centrifugal pumps, water-ring vacuum pump, cooling water pump, vaccum tank, heat exchanger, EX-proof distribution box, and PLC control box.
2 Steam and Protective Gas Generating Unit Provide inert gas protection for cleaning activities and steam heat source Disel boiler, soft water system, soft water tank, diesel tank, cooling water tank
3 Nitrogen Making Unit Provide nitrogen for cleaning activities Air compressor, air storage tank, adsorption treatment system
4 Oil-gas Seperator Unit Used for separation of oil and water during warm water cleaning, recycling warm water and transferring recovered oil to designated oil tanks. One set of 2'' pneumatic diaphragm pump, level gauge, thermometer
5 Air Supply and Distribution Unit Provide power distribution and gas supply for whole system. General distribution box, screw air compressor, air storage tank, drying tank, air distribution bag
6 Jet washer Compressed air is used as power drive, which is safe and reliable. The cleaning angle is 360° horizontally and 140 °vertically. There is no dead angle in all directions.


Parameters

Unit NameModelMain Parameter
Circulation and Transfer Unit LDTC180 Size:6058*2438*2951mm Weight:15000Kg Total Power:160kw Flow:180m³/h Head:70m
Steam and Protective Gas Generating Unit 2T Size:6058*2438*2951mm Weight:10000Kg Total Power:25kw Evaporation Capacity:2000Kg/h
Nitrogen Making Unit 200 Size:6058*2438*2591mm Weight:12000Kg Nitrogen Purity:99% Total Power:80kw Capacity of nitrogen making:200m³/h Nitrogen Pressure:0.1~0.6Mpa
Oil-gas Seperator Unit
Size:6058*2438*2438mm Weight:4000Kg Volume:20m³ Max. flow of diaphragm pump:35m³/h Max. Working Pressure: 0.85Mpa
Air Supply and Distribution Unit
Size:2985*2438*2438mm Weight:3000Kg Total Power:200kw Displacement:3.6m³/h Max. Discharge Pressure: 0.7Mpa